The DataBank is a universal handheld meter, datalogger and power supply. Designed to work with analog sensors from various manufacturers, the DataBank is easy to connect and use. Data, including GPS information, can be stored and downloaded to a PC. Sensor calibration is simplified through continuous sensor readings with results graphically displayed. Sensor power is provided directly from the DataBank, eliminating the need to connect external batteries. Designed with the customer in mind, the DataBank allows one-handed operation – even while wearing gloves. |
Selectable Sensor Parameters Voltage: Software selectable 3 to 12 volts Current: 150 mA at 3V to 100 mA at 12V Warm-up Time: 0-25 seconds Gain: 1-4
Inputs Input Selection: Switch; Differential Voltage, Differential Current or Dual Current Range: 0-5V or 0-25 mA Resolution: 12 bits Sampling Rate: 1000 Hz (bursts); groups of bursts re-averaged @ 30 Hz
Outputs Two, Open Drain, up to 200 mA @ 15V max (Used primarily for gain selection)
Storage Non-Volatile, 1280 Kb (9,999 records, 1 record = sensor reading, date, time and location)
Current Draw Computer: <=45 mA (at full charge). Sleeping <20 uA LCD Backlight: Full power ~ 30 mA. Low Power ~ 15 mA
Battery Type: NiMH rechargable, 4.8 volts, 4,000 mA/Hr. User-replaceable Life: Continuous up to 70 hours (dependant on sensor/settings)
Charge Time ~3 hours (for a fully discharged battery; ambient @ 25 degrees C)
Communications USB (Standard) RS232 (Optional)
GPS Power 3.3 VDC @ up to 300 mA; If DataBank is off, GPS is self-powered Note: Some GPS units cannot be powered by the DataBank
Size Main body: 4.6”W x 3.2”H, x 3.4”D, Handle: 4.8” long Overall: 11”H (with handle, strain-relief and connector).
Weight 1.7 lb. (.76 kg) w/o GPS
Material Case IP65, connector IP68, buttons IP64. |