|
The OTT KL 010 series contact gauges are designed to perform manual control measurements at groundwater measurement sites. These units have been tried and tested for years and are primarily used for measuring depths. Additionally, the KL 010 TM and KL 010 TCM model versions can be used for measuring the water temperature or electrical conductivity, respectively.
| |
- Contact Gauge KL 010
- Quick, simple and economic measurement of ground water level (distance to water)
- Optical and acoustic signal
- White polyethylene measuring tape with meter markings in red, cm division, dm numbering in black
- Rugged style
- Powered by four 1.5 Volt batteries (C-cells)
- Measuring tape available in lengths between 15 and 750 m (12 options)
-
- Contact Gauge KL 010-TM
- Same features as KL 010 but with additional temperature sensor
- Display, optical signal, accoustic signal
- Temperature measuring range -1 ... + 70 °C, Accuracy: +/- 0.1 °C
- Measuring tape available in lengths between 25 and 500 m (8 options)
-
- Contact Gauge KL 010-TCM
- Same features as KL 010 TM but with additional conductivity sensor
- Measuring range -5 ... + 60 °C, Accuracy: +/- 0.1 °C
- Conductivity measuring range 0 … 200 mS/cm Accuracy: ? +/-0.5% of measured value min. +/- 2?S/cm
- Measuring tape available in lengths between 30 and 500 m (7 options)
| |
- OTT contact gauges are used all over the world for measurements of depth to water.
- Hydrologists appreciate the simple and rugged contruction.
- Optic and acoustic signals.
- High-strength special plastic frame with robust drum.
- Probe body: stainless steel (V2A) /nickel-plated brass; easy to clean.
- Accurate, length-stable measuring tape with cm graduation and dm marking.
- Optional: temperature measurement with LCD-display.
- Optional: conductivity- and temperature measurement with LCD-display.
| |
| Measuring tape |
White polyethylen tape (two wires)
Conductor in high strength, rust and acid resistant stainless stell wires |
| |
Meter graduation in red, centimetre marks and decimetre graduation in black on white tape |
| Measuring accuracy |
0,1 % FS |
| Tape drum |
Special plastic, high strength, resistant to low temperatures Protection Class IP 64 |
| Frame design 1 |
Cast aluminium, steel |
| Frame design 2 |
Special plastic, high strength, resistant to low temperatures |
| Power supply |
6 V DC; 4 x 1.5 V C-type cells (alkaline); |
| Operating life |
≥12 months (KL 010 / TM) |
| |
approx. 180 hours (KL 010 TCM) |
| Operating temperature range |
– 30 °C … +75 °C |
| |
|
| KL 010 |
|
| Measuring tape lengths |
15, 25, 30, 50, 80, 100, 150, 200, 250, 300, 500 and 750 m |
| Signalling |
Optical (signal lamp; LED optionally) & accoustic |
| Probe body |
Stainless steel/nickel-plated brass,15 mm Ø, 190 mm long |
| Weight |
approx. 3.8 kg (15 m) … 18.5 kg (750 m) |
| |
|
| KL 010 TM |
|
| Measuring tape lengths |
25, 50, 100, 150, 200, 250, 300 und 500 m |
| Signalling/Indication |
Display (LCD), 3 ½ digits |
| Resolution |
0.1 °C |
| |
Button to display battery capacity in % |
| |
Optical signal (LED) & accoustic |
| Temperature sensor |
– 5 °C … + 60 °C |
| Accuracy |
± 0.1 °C |
| Probe body |
Stainless steel/nickel-plated brass, Ø 15 mm, 183 mm long |
| Weight |
approx. 3.6 kg (25 m) … 14.3 kg (500 m) |
| |
|
| KL 010 TCM |
|
| Measuring tape lengths |
30, 50, 100, 150, 200, 250 und 500 m |
| Signalling/Indication |
Display (LCD), 3 digits |
| |
bar graph display for battery state |
| |
Optical signal (LED) & accoustic |
| Temperature sensor |
– 1 °C … + 70 °C |
| Accuracy |
± 0.1 °C |
| Conductivity measuring cell |
0 … 200 mS/cm |
| Accuracy |
≤ ±0.5% of measured value, min. ± 2μS/cm |
| Probe body |
Stainless steel, Ø 20 mm, 238 mm long |
| Weight |
approx. 3.7 kg (30 m) … 14.5 kg (500 m) |
| Temperature operating range |
|
|  |
