View All Sea Bird View All Hydrolab Products View All OTT Products View All ADCON Products View All Van Essen Products View All Eijkelkamp Products View All Turner Products View All Turner Products

Like its analog counter part the new LEV2 level sensor is fully digitally compensated and built for Adcon in Switzerland. In addition to the pressure reading it also outputs the temperature of the water table. A pressure relief box with a silica pack inside is fitted to the end of the reference tube, which is embedded into the cable, to prevent condensation from blocking barometric pressure compensation.

The probes are extremely accurate and provide excellent long term stability. Power is provided by the RTU's internal battery pack.

Three different pressure cells are available, 1, 3 and 10bar, corresponding to approx. 10, 30 and 100m of water column.


Level Sensor: 
Pressure transmitter piezo resistive
Measuring Ranges 1, 3, 10 bar
Overpressure 3, 7, 20 bar
Type of reading relative, compensated against barometric pressure
Operating temperature -40°C ... +80°C
Compensated Range 0°C ... +80°C
Accuracy (0-50°C) 0,1% FS
Resolution < 0,01% FS
Long Term Stability typ. Range < 1 bar: 1mbar 
Range > 1 bar: 0,1% FS
Measuring range -20°C ... +60°C
Accuracy <0,2°C
Interface SDI-12
Supply Voltage 5.5 ... 34V DC
Length 95mm / 3.74"
Diameter 22mm / 0.9"
Cable Polyethylene (PE), vented
Cable length up to 100m
Connector 7-pin M9 Binder jack (male)
IP Protection IP68 (Probe), IP67 (Connector)
Material in Contact with Media Stainless Steel 316L (DIN 1.4435) / 
Viton / PE

Related Categories
Precipitation Sensors
Weather Stations
Soil Moisture
Data Services